AMC72L-AI3 Dreiphasiges programmierbares AC-Amperemeter

AMC72L-AI3 Three Phase Programmable AC Ammeter

The AMC72L-AI3 can measure the current signal in the three-phase power grid in real time. The device can be equipped with an RS-485 communication interface and uses the Modbus RTU protocol. It can provide an analog output, a relay alarm output, and a switch input/output. Parameters such as the transformation ratio, alarm, and communication can be set and controlled using the buttons on the instrument panel.

Three-phase ammeter

LCD display

RS485 and Modbus RTU protocols

Input AC 3*1A or 3*5A (via CTs)

Accuracy: 0.5

Standard and certificate: CE

Product info

Three-phase AC ammeter
Communication:	RS485(Modbus RTU)
Advertisement:	LCD display, set multiplier power
Rated current:	AC 31A, 35A (via CTs)
Measurement accuracy:	Active energy: Class 0.5
Installation:	Panel mounted
Dimensions (L&H):	Panel size (L×W): 7575mm Cutout(L×W): 6767mm Depth (H): 94.3mm
Consumption:	Power consumption: < 0.5VA; Power consumption: ≤5VA
Auxiliary power supply:	AC/DC 85-265V
Alarm output (optional):	DC 30V/3A; AC 250V/3A
Analog output (optional):	DC 4~20mA
DI/DO function (optional):	2-channel DI and 2-channel DO
Operating temperatur:	-10℃～+55℃
Storage temperature:	-25°C ~+70°C

Technical data

type	basic function	form	Optional function
AMC48-AI AMC48-AV	Current, voltage measurement; LED display	48 square	RS485 communication (/C ) Analog output (/M )
AMC48-AI3 AMC48-AV3	Current, voltage measurement; LED display		No one
AMC48L-AI AMC48L-AV	Current, voltage measurement; LCD display		1.RS485 communication (/C ) 2. Analog output (/M )
AMC48L-AI3 AMC48L-AV3	Current, voltage measurement; LCD display		No one
AMC72-AI AMC72-AV AMC72-AI3 AMC72-AV3	Current, voltage measurement; LED display	72 square	1.RS485 communication (/C ) 2. Analog output (/M ) 3. Alarm output (/J) 4.Analog output + RS485 communication (/MC ) 5.RS485 communication + switching output: 2DI2DO (/KC ) 6.Alarm output + analog output +RS485 communication (/JMC )
AMC72-DI AMC72-DV	DC current, voltage measurement; LED display
AMC72L-AI AMC72L-AV AMC72L-AI3 AMC72L-AV3	Current, voltage measurement; LCD display
AMC72L-DI AMC72L-DV	DC current and voltage measurement; LCD display
AMC96-AI AMC96-AV AMC96-AI3 AMC96-AV3	Current, voltage measurement; LED display	96 square	1.RS485 communication (/C ) 2. Analog output (/M or /3M ) 3. Alarm output (/J) 4.Analog output + RS485 communication (/ MC or /M3C ) 5.RS485 communication + switching 4DI2DO (/KC ) 6.Alarm output + analog output +RS485 communication (/JMC )
AMC96L-AI AMC96L-AV AMC96L-AI3 AMC96L-AV3	Current, voltage measurement; LCD display	96 square
A notice: 1. AI/AV means single-phase current/voltage, AI3/AV3 means three-phase current/voltage; 2. /J means 1-channel relay output (multiplexing with switching output of the second channel)

Technical data		Value
Entrance	Nominal value	Alternating voltage: Single-phase AC 100V,400V
		Three-phase AC 100V, 400V, 660V (UL-L, 72/ 96 only)
		Alternating current:AC1A,5A;
	Overload	Voltage: 1.2 times nominal value (continuous); 2 times nominal value /1 second
		Current: 1.2 times nominal value (continuous); 10 times nominal value /1 second
	frequency	45Hz～65Hz
	Power consumption	The power consumption of each voltage and current input circuit is less than 0.5VA
accuracy		Class 0.5
function	Advertisement	LED or LCD
	communication	RS485, Modbus RTU protocol;(1 start bit, 8 data bits, 1 stop bit, no parity)
		Baud rate 2400/4800/9600/19200 bps etc.
	alarm	1 channel passive relay, contact capacity 3A/30VDC, 3A/250VAC, used for high, low, unbalance alarm, etc.
	Analogous	DC4~20mA, (load <500Ω)
		(Note: Shielded cable is specially selected for the above signal inputs and outputs)
	Switch	Input: 4-channel or 2-channel dry contact input, built-in power supply
		Output: 2-channel switching output, NO relay contact, capacity: 3A/30VDC, 3A/250VAC
Auxiliary power supply		AC/DC 85-265V
Power consumption		<5VA
Insulation resistance		≥ 100MΩ
Mains frequency withstand voltage		Between the power supply terminal set and the signal input, the output terminal set 2kV/1min (RMS)
		Between the housing and all connection sets (except those with a reference voltage of less than 40V) AC 4kV
Vicinity	temperature	Operating: -10℃～+55℃Storage: -25°C ~+70°C
	humidity	≤95%RH, no condensation, no corrosive gas
	Altitude	≤ 2500m